Armchair with demands on comfort, hygiene and security
Generous, neat and easily placed
Inclusive and embracing
Gap between seat, back and frame for best hygiene
Any NCS color
Tested for public use and meets the requirements for durability & safety, set forth in the following standard, EN 16139
Tested for 160kg

Frame in FSC-certified oak or birch
Frame in any NCS color
Rubber fabric/hospital fabric

Solid wood

Height119 cm

Width60 cm

Depth81 cm

Seat height47 cm

Seat depth47 cm

Arm height67 cm

Views

Environmental documents

Sustainability declaration

FSC-cert

DWG-files

2D DWG

3D DWG

BIM-object

Product sheet

Amulett 736 PS Product sheet (PDF)

Care instructions for this piece of furniture

Wood

Wood is a living material whose grain from the very beginning has a natural variation in pattern, color tone and luster. The wood is affected by, among other things, the season, heat and humidity. That wood is a living material means:

Screws need to be re-tightened regularly, at least once a year.
Solid table tops can naturally warp by up to 0.5%.
Light from the sun and lighting can cause permanent color and light differences in the surface, so allow the entire wooden surface to be exposed to the same amount of light.

Out of concern for the environment, we paint a large part of our range with water-based surface treatments. This means:

Spills of coffee and other liquids need to be wiped up immediately.
For cleaning, hand washing detergent or pH-neutral detergents and lukewarm water are recommended. Wipe off with clean water and wipe dry. Do not use cleaning agents that are alkaline, aggressive, contain abrasives or solvents.
For disinfection, non-alcohol-based agents are recommended, e.g. Virkon or DAX Alco Free. Alcohol-based agents must not be used.

Fabric

Removable and washable fabrics are washed according to washing instructions. These are sewn with a shrink seam, wash before use for optimal fit.
Vacuuming with a soft nozzle is often sufficient for cleaning.
Stains should always be removed as quickly as possible. In most cases, wiping with a damp cloth is sufficient, for more difficult stains, a pH-neutral detergent or a foam detergent for professional use can be used.
Always use white cloths and avoid wetting a woolen fabric to a greater extent, as this risks remaining stains.
If necessary, a foam detergent can also be used for a more thorough cleaning if this is allowed in the fabric's specification.

Plastic

For wiping, use a mild detergent without solvents or abrasives. Regular dish soap works well.

Metal

For regular cleaning, use a lightly moistened cloth with a mild detergent without solvents or abrasives.
For heavily soiled surfaces, a cloth moistened with alcohol can be used.
Disinfection can be done with alcohol if the surface is dried afterwards.

Laminate

Laminates are very durable surfaces that fit well in public environments.

Daily cleaning with a dry cloth.
For more difficult stains, non-abrasive cleaners can be used.
Hardly ingrained stains or discolorations can usually be removed by carefully using a cleaning agent with a mild abrasive action.
Rings and streaks that form on the surface are most easily removed with window cleaner.
Do not use scouring pads or steel wool as this will cause scratches.
Marker and ink marks can be removed with e.g. acetone or alcohol on a clean cloth.
Disinfection can be done with alcohol if the surface is dried afterwards.

Leather

If you take care of the leather in the right way, it will become more beautiful over the years.

Leather is heat sensitive. Therefore, direct sunlight and close contact with heating elements should be avoided.
Vacuum the furniture to remove loose dirt and dust.
Wipe the leather with a slightly damp cloth and a mild soapy solution can be used for cleaning.
Water-based leather care products extend the lifespan.

Glass

Cleaned with window cleaner or washing-up liquid diluted in water.

Amulett 736 PS

Functional armchair

Amulett is available in two variants 731 PS which is fixed and 736 PS which is adjustable.

Amulett PS chairs are designed to be used in environments with with tougher safety requirements, such as a psychiatric clinic. The PS armchairs have a full-coverage, nailed box that hides the mechanism and a damask in black artificial leather to hide the gas spring. Amulett PS has a fixed upholstery, which means a different sewing method that reduces the risk of bacterial traps. In addition, all visible screws have been replaced with safety screws. The control on the Amulett 736 PS has a more discreet design to reduce attention and which follows the seat up at a tighter angle.

Amulett family is inclusive and embracing armchairs and footstools that are designed to function in environments with very high demands on comfort, hygiene and safety. The design of the well worked soft armrest and together with the natural material, creates a high tactile sensation. Amulett is generous but still pretty and easily placed.

For optimal hygiene, Amulett PS has a gap between the seat and back to prevent dirt and bacteria from sticking. Amulett PS is made of FSC® mix.

Amulett PS is design by Studio JOOY.

Armchair with demands on comfort, hygiene and security
Generous, neat and easily placed
Inclusive and embracing
Gap between seat, back and frame for best hygiene
Any NCS color
Tested for public use and meets the requirements for durability & safety, set forth in the following standard, EN 16139
Tested for 160kg

Frame in FSC-certified oak or birch
Frame in any NCS color
Rubber fabric/hospital fabric

Solid wood