Added value
- Classic chair with modern function and comfort
- Gap between seat and frame for best hygiene
- Rubber fabric as standard
- Removable upholstery
- Any NCS color
- Tested for public use and meets the requirements for durability & safety, set forth in the following standard, EN 16139
Accessories
- Frame in birch
- Frame in any NCS color
- Back cushion
- Sliding wheels
- +5 cm seat height
- Rubber fabric/hospital fabric
Reuse
- Solid wood
- Removable upholstery
Specifications
Height86 cm
Width56 cm
Depth55 cm
Seat height46 cm
Seat depth42 cm
Arm height67 cm
Views
Any NCS color available as
an option on this product.
Downloads
Environmental documents
DWG-files
BIM-object
Product sheet
Care instructions for this piece of furniture
Wood
Wood is a living material whose grain from the very beginning has a natural variation in pattern, color tone and luster. The wood is affected by, among other things, the season, heat and humidity. That wood is a living material means:
- Screws need to be re-tightened regularly, at least once a year.
- Solid table tops can naturally warp by up to 0.5%.
- Light from the sun and lighting can cause permanent color and light differences in the surface, so allow the entire wooden surface to be exposed to the same amount of light.
- Spills of coffee and other liquids need to be wiped up immediately.
- For cleaning, hand washing detergent or pH-neutral detergents and lukewarm water are recommended. Wipe off with clean water and wipe dry. Do not use cleaning agents that are alkaline, aggressive, contain abrasives or solvents.
- For disinfection, non-alcohol-based agents are recommended, e.g. Virkon or DAX Alco Free. Alcohol-based agents must not be used.
Fabric
- Removable and washable fabrics are washed according to washing instructions. These are sewn with a shrink seam, wash before use for optimal fit.
- Vacuuming with a soft nozzle is often sufficient for cleaning.
- Stains should always be removed as quickly as possible. In most cases, wiping with a damp cloth is sufficient, for more difficult stains, a pH-neutral detergent or a foam detergent for professional use can be used.
- Always use white cloths and avoid wetting a woolen fabric to a greater extent, as this risks remaining stains.
- If necessary, a foam detergent can also be used for a more thorough cleaning if this is allowed in the fabric's specification.
Plastic
For wiping, use a mild detergent without solvents or abrasives. Regular dish soap works well.
Metal
- For regular cleaning, use a lightly moistened cloth with a mild detergent without solvents or abrasives.
- For heavily soiled surfaces, a cloth moistened with alcohol can be used.
- Disinfection can be done with alcohol if the surface is dried afterwards.
Laminate
Laminates are very durable surfaces that fit well in public environments.
- Daily cleaning with a dry cloth.
- For more difficult stains, non-abrasive cleaners can be used.
- Hardly ingrained stains or discolorations can usually be removed by carefully using a cleaning agent with a mild abrasive action.
- Rings and streaks that form on the surface are most easily removed with window cleaner.
- Do not use scouring pads or steel wool as this will cause scratches.
- Marker and ink marks can be removed with e.g. acetone or alcohol on a clean cloth.
- Disinfection can be done with alcohol if the surface is dried afterwards.
Leather
If you take care of the leather in the right way, it will become more beautiful over the years.
- Leather is heat sensitive. Therefore, direct sunlight and close contact with heating elements should be avoided.
- Vacuum the furniture to remove loose dirt and dust.
- Wipe the leather with a slightly damp cloth and a mild soapy solution can be used for cleaning.
- Water-based leather care products extend the lifespan.
Glass
Cleaned with window cleaner or washing-up liquid diluted in water.
Ellinor 147
Armchair with two seat heights
Ellinor is a stileys furnitur family with a classic design. Ellinor is available in many versions to meet everyone's needs. The chair is available without frames and as an XL variant with extra seat width. Ellinor is also available as an armchair with two different seat heights, to make it easier for those who have difficulty getting up and down from a traditional chair.
The furniture family has a seat that is upholstered throughout and our smart gap to prevent dirt from getting stuck between the fabric-covered seat and the frame. The chairs are therefore easy to clean and contribute to the cleanliness of public spaces.
Ellinor is made of FSC-mix and meets Möbelfakta's requirements, making your purchase a sustainable and environmentally friendly choice.
Ellinor is design by Marie Norell Möller.
Any NCS color available as
an option on this product.
Added value
- Classic chair with modern function and comfort
- Gap between seat and frame for best hygiene
- Rubber fabric as standard
- Removable upholstery
- Any NCS color
- Tested for public use and meets the requirements for durability & safety, set forth in the following standard, EN 16139
Accessories
- Frame in birch
- Frame in any NCS color
- Back cushion
- Sliding wheels
- +5 cm seat height
- Rubber fabric/hospital fabric
Reuse
- Solid wood
- Removable upholstery
Specifications
Height86 cm
Width56 cm
Depth55 cm
Seat height46 cm
Seat depth42 cm
Arm height67 cm
Views
Any NCS color available as
an option on this product.
Downloads
Environmental documents
DWG-files
BIM-object
Product sheet
Care instructions for this piece of furniture
Wood
Wood is a living material whose grain from the very beginning has a natural variation in pattern, color tone and luster. The wood is affected by, among other things, the season, heat and humidity. That wood is a living material means:
- Screws need to be re-tightened regularly, at least once a year.
- Solid table tops can naturally warp by up to 0.5%.
- Light from the sun and lighting can cause permanent color and light differences in the surface, so allow the entire wooden surface to be exposed to the same amount of light.
- Spills of coffee and other liquids need to be wiped up immediately.
- For cleaning, hand washing detergent or pH-neutral detergents and lukewarm water are recommended. Wipe off with clean water and wipe dry. Do not use cleaning agents that are alkaline, aggressive, contain abrasives or solvents.
- For disinfection, non-alcohol-based agents are recommended, e.g. Virkon or DAX Alco Free. Alcohol-based agents must not be used.
Fabric
- Removable and washable fabrics are washed according to washing instructions. These are sewn with a shrink seam, wash before use for optimal fit.
- Vacuuming with a soft nozzle is often sufficient for cleaning.
- Stains should always be removed as quickly as possible. In most cases, wiping with a damp cloth is sufficient, for more difficult stains, a pH-neutral detergent or a foam detergent for professional use can be used.
- Always use white cloths and avoid wetting a woolen fabric to a greater extent, as this risks remaining stains.
- If necessary, a foam detergent can also be used for a more thorough cleaning if this is allowed in the fabric's specification.
Plastic
For wiping, use a mild detergent without solvents or abrasives. Regular dish soap works well.
Metal
- For regular cleaning, use a lightly moistened cloth with a mild detergent without solvents or abrasives.
- For heavily soiled surfaces, a cloth moistened with alcohol can be used.
- Disinfection can be done with alcohol if the surface is dried afterwards.
Laminate
Laminates are very durable surfaces that fit well in public environments.
- Daily cleaning with a dry cloth.
- For more difficult stains, non-abrasive cleaners can be used.
- Hardly ingrained stains or discolorations can usually be removed by carefully using a cleaning agent with a mild abrasive action.
- Rings and streaks that form on the surface are most easily removed with window cleaner.
- Do not use scouring pads or steel wool as this will cause scratches.
- Marker and ink marks can be removed with e.g. acetone or alcohol on a clean cloth.
- Disinfection can be done with alcohol if the surface is dried afterwards.
Leather
If you take care of the leather in the right way, it will become more beautiful over the years.
- Leather is heat sensitive. Therefore, direct sunlight and close contact with heating elements should be avoided.
- Vacuum the furniture to remove loose dirt and dust.
- Wipe the leather with a slightly damp cloth and a mild soapy solution can be used for cleaning.
- Water-based leather care products extend the lifespan.
Architect SIR/MSA
Marie Norell-Möller is an architect and she works in her own company Norell-Möbel AB.
Similar products
Amulett 738 PS
Footstool
Julia 764
Shelf
Freja 339 XL
Armchair with high back
Charlie 1152 XL
Wide armchair
Amulett 731 PS
Armchair
Amulett 736 PS
Functional armchair
Amulett 735
Functional armchair
Amulett 730
Armchair
Humlan 772
Coffee table
Freja 239
Functional armchair
Similar products
Rialto 438
Bar stool
Knut 121
Armchair with upholstered seat and back
Knut 021
Chair with upholstered seat and back
Knut 020
Chair with wooden seat
Freja 066
Chair
Erik 460
Chair
Björn 185
Armchair
Björn 085
Chair
Björn 095
Chair
Alvastra 061
Chair
Alva 172
Armchair with upholstered seat
Similar products
Rialto 438 Hög
High bar stool
Rialto 438
Bar stool
Kurbits 326
Peg chair sofa
Kurbits 134
Armchair
Knut 021
Chair with upholstered seat and back
Knut 020
Chair with wooden seat
Humlan 370
Chair
Freja 1166 XL
Wide armchair
Erik 465 XL
Wide armchair
Björn 085
Chair
Alva 074
Chair