• Uniform expression with multifunctions
  • Customizable and generous seating
  • Offers many tactile materials
  • Gap between seat and back for best hygiene
  • Easy to get to under the sofa, which facilitates cleaning
  • Removable upholstery
  • Any NCS color
  • Tested for public use and meets the requirements for durability & safety, set forth in the following standard, EN 16139
  • Frame in birch
  • Frame in any NCS color
  • Low or high back
  • Rubber fabric/hospital fabric
  • Fabric-covered armrests
  • Interarm support
  • +5 cm seat height
  • Solid wood
  • Removable upholstery
  • Replaceable padding

Height98 cm

Width193 cm

Depth71 cm

Seat height47 cm

Seat depth46 cm

Arm height63 cm

Views
Any NCS color available as
an option on this product.
Care instructions for this piece of furniture
Wood is a living material whose grain from the very beginning has a natural variation in pattern, color tone and luster. The wood is affected by, among other things, the season, heat and humidity. That wood is a living material means:
  • Screws need to be re-tightened regularly, at least once a year.
  • Solid table tops can naturally warp by up to 0.5%.
  • Light from the sun and lighting can cause permanent color and light differences in the surface, so allow the entire wooden surface to be exposed to the same amount of light.
Out of concern for the environment, we paint a large part of our range with water-based surface treatments. This means:
  • Spills of coffee and other liquids need to be wiped up immediately.
  • For cleaning, hand washing detergent or pH-neutral detergents and lukewarm water are recommended. Wipe off with clean water and wipe dry. Do not use cleaning agents that are alkaline, aggressive, contain abrasives or solvents.
  • For disinfection, non-alcohol-based agents are recommended, e.g. Virkon or DAX Alco Free. Alcohol-based agents must not be used.
  • Removable and washable fabrics are washed according to washing instructions. These are sewn with a shrink seam, wash before use for optimal fit.
  • Vacuuming with a soft nozzle is often sufficient for cleaning.
  • Stains should always be removed as quickly as possible. In most cases, wiping with a damp cloth is sufficient, for more difficult stains, a pH-neutral detergent or a foam detergent for professional use can be used.
  • Always use white cloths and avoid wetting a woolen fabric to a greater extent, as this risks remaining stains.
  • If necessary, a foam detergent can also be used for a more thorough cleaning if this is allowed in the fabric's specification.
For wiping, use a mild detergent without solvents or abrasives. Regular dish soap works well.
  • For regular cleaning, use a lightly moistened cloth with a mild detergent without solvents or abrasives.
  • For heavily soiled surfaces, a cloth moistened with alcohol can be used.
  • Disinfection can be done with alcohol if the surface is dried afterwards.
Laminates are very durable surfaces that fit well in public environments.
  • Daily cleaning with a dry cloth.
  • For more difficult stains, non-abrasive cleaners can be used.
  • Hardly ingrained stains or discolorations can usually be removed by carefully using a cleaning agent with a mild abrasive action.
  • Rings and streaks that form on the surface are most easily removed with window cleaner.
  • Do not use scouring pads or steel wool as this will cause scratches.
  • Marker and ink marks can be removed with e.g. acetone or alcohol on a clean cloth.
  • Disinfection can be done with alcohol if the surface is dried afterwards.
If you take care of the leather in the right way, it will become more beautiful over the years.
  • Leather is heat sensitive. Therefore, direct sunlight and close contact with heating elements should be avoided.
  • Vacuum the furniture to remove loose dirt and dust.
  • Wipe the leather with a slightly damp cloth and a mild soapy solution can be used for cleaning.
  • Water-based leather care products extend the lifespan.
Cleaned with window cleaner or washing-up liquid diluted in water.

Jackie 533

Three-seater sofa

Jackie is a versatile furniture family with armchairs, sofas and chairs with different functions and sizes with tactile materials that create a varied but harmonious and unified expression.

Jackie 533 is a flexible and inclusive three-seater sofa, with clearly defined seating. It is slightly lower than its sibling, the Jackie 543, which has a head cushion. For best hygiene, Jackie has removable upholstery and a gap between the seat and back to prevent dirt and bacteria from getting stuck.

The furniture family is made of FSC-certified birch and is labeled Möbelfakta. Jackie is design by Peter Andersson.

Any NCS color available as
an option on this product.
  • Uniform expression with multifunctions
  • Customizable and generous seating
  • Offers many tactile materials
  • Gap between seat and back for best hygiene
  • Easy to get to under the sofa, which facilitates cleaning
  • Removable upholstery
  • Any NCS color
  • Tested for public use and meets the requirements for durability & safety, set forth in the following standard, EN 16139
  • Frame in birch
  • Frame in any NCS color
  • Low or high back
  • Rubber fabric/hospital fabric
  • Fabric-covered armrests
  • Interarm support
  • +5 cm seat height
  • Solid wood
  • Removable upholstery
  • Replaceable padding

Height98 cm

Width193 cm

Depth71 cm

Seat height47 cm

Seat depth46 cm

Arm height63 cm

Views
Any NCS color available as
an option on this product.
Care instructions for this piece of furniture
Wood is a living material whose grain from the very beginning has a natural variation in pattern, color tone and luster. The wood is affected by, among other things, the season, heat and humidity. That wood is a living material means:
  • Screws need to be re-tightened regularly, at least once a year.
  • Solid table tops can naturally warp by up to 0.5%.
  • Light from the sun and lighting can cause permanent color and light differences in the surface, so allow the entire wooden surface to be exposed to the same amount of light.
Out of concern for the environment, we paint a large part of our range with water-based surface treatments. This means:
  • Spills of coffee and other liquids need to be wiped up immediately.
  • For cleaning, hand washing detergent or pH-neutral detergents and lukewarm water are recommended. Wipe off with clean water and wipe dry. Do not use cleaning agents that are alkaline, aggressive, contain abrasives or solvents.
  • For disinfection, non-alcohol-based agents are recommended, e.g. Virkon or DAX Alco Free. Alcohol-based agents must not be used.
  • Removable and washable fabrics are washed according to washing instructions. These are sewn with a shrink seam, wash before use for optimal fit.
  • Vacuuming with a soft nozzle is often sufficient for cleaning.
  • Stains should always be removed as quickly as possible. In most cases, wiping with a damp cloth is sufficient, for more difficult stains, a pH-neutral detergent or a foam detergent for professional use can be used.
  • Always use white cloths and avoid wetting a woolen fabric to a greater extent, as this risks remaining stains.
  • If necessary, a foam detergent can also be used for a more thorough cleaning if this is allowed in the fabric's specification.
For wiping, use a mild detergent without solvents or abrasives. Regular dish soap works well.
  • For regular cleaning, use a lightly moistened cloth with a mild detergent without solvents or abrasives.
  • For heavily soiled surfaces, a cloth moistened with alcohol can be used.
  • Disinfection can be done with alcohol if the surface is dried afterwards.
Laminates are very durable surfaces that fit well in public environments.
  • Daily cleaning with a dry cloth.
  • For more difficult stains, non-abrasive cleaners can be used.
  • Hardly ingrained stains or discolorations can usually be removed by carefully using a cleaning agent with a mild abrasive action.
  • Rings and streaks that form on the surface are most easily removed with window cleaner.
  • Do not use scouring pads or steel wool as this will cause scratches.
  • Marker and ink marks can be removed with e.g. acetone or alcohol on a clean cloth.
  • Disinfection can be done with alcohol if the surface is dried afterwards.
If you take care of the leather in the right way, it will become more beautiful over the years.
  • Leather is heat sensitive. Therefore, direct sunlight and close contact with heating elements should be avoided.
  • Vacuum the furniture to remove loose dirt and dust.
  • Wipe the leather with a slightly damp cloth and a mild soapy solution can be used for cleaning.
  • Water-based leather care products extend the lifespan.

Designers

Peter Andersson currently works as a freelancer but has previously worked as a head teacher at Beckmans School of Design and as a lecturer in furniture design at Konstfack University College of Arts Crafts and Design in Stockholm. He was born in 1970 in Trelleborg, Sweden.

Similar products

Amulett 738 PS

Footstool

Julia 764

Shelf

Freja 339 XL

Armchair with high back

Charlie 1152 XL

Wide armchair

Amulett 731 PS

Armchair

Amulett 736 PS

Functional armchair

Amulett 735

Functional armchair

Amulett 730

Armchair

Humlan 772

Coffee table

Freja 239

Functional armchair

Similar products

Similar products

Our website uses cookies to make sure the website work well for you. See our privacy policy or read more about cookies.
Search