We use almost all of the raw wood
Reduced material consumption
Light with good strength
Hangable
Demountable-replaceable spare parts
Removable upholstery
Any NCS color
Tested for public use and meets the requirements for durability & safety, set forth in the following standard, EN 16139

Frame in birch
Frame in any NCS color
Back and seat cushion
Rubber fabric
Sliding wheels

Solid wood
Removable upholstery
Replaceable padding

Height85 cm

Width54 cm

Depth53 cm

Seat height45 cm

Seat depth44 cm

Arm height65 cm

Views

Environmental documents

FSC-Cert

Möbelfakta certificate

Sustainability declaration

DWG-files

2D DWG

3D DWG

BIM-object

Product sheet

Rare 077 Product sheet (PDF)

Care instructions for this piece of furniture

Wood

Wood is a living material whose grain from the very beginning has a natural variation in pattern, color tone and luster. The wood is affected by, among other things, the season, heat and humidity. That wood is a living material means:

Screws need to be re-tightened regularly, at least once a year.
Solid table tops can naturally warp by up to 0.5%.
Light from the sun and lighting can cause permanent color and light differences in the surface, so allow the entire wooden surface to be exposed to the same amount of light.

Out of concern for the environment, we paint a large part of our range with water-based surface treatments. This means:

Spills of coffee and other liquids need to be wiped up immediately.
For cleaning, hand washing detergent or pH-neutral detergents and lukewarm water are recommended. Wipe off with clean water and wipe dry. Do not use cleaning agents that are alkaline, aggressive, contain abrasives or solvents.
For disinfection, non-alcohol-based agents are recommended, e.g. Virkon or DAX Alco Free. Alcohol-based agents must not be used.

Fabric

Removable and washable fabrics are washed according to washing instructions. These are sewn with a shrink seam, wash before use for optimal fit.
Vacuuming with a soft nozzle is often sufficient for cleaning.
Stains should always be removed as quickly as possible. In most cases, wiping with a damp cloth is sufficient, for more difficult stains, a pH-neutral detergent or a foam detergent for professional use can be used.
Always use white cloths and avoid wetting a woolen fabric to a greater extent, as this risks remaining stains.
If necessary, a foam detergent can also be used for a more thorough cleaning if this is allowed in the fabric's specification.

Plastic

For wiping, use a mild detergent without solvents or abrasives. Regular dish soap works well.

Metal

For regular cleaning, use a lightly moistened cloth with a mild detergent without solvents or abrasives.
For heavily soiled surfaces, a cloth moistened with alcohol can be used.
Disinfection can be done with alcohol if the surface is dried afterwards.

Laminate

Laminates are very durable surfaces that fit well in public environments.

Daily cleaning with a dry cloth.
For more difficult stains, non-abrasive cleaners can be used.
Hardly ingrained stains or discolorations can usually be removed by carefully using a cleaning agent with a mild abrasive action.
Rings and streaks that form on the surface are most easily removed with window cleaner.
Do not use scouring pads or steel wool as this will cause scratches.
Marker and ink marks can be removed with e.g. acetone or alcohol on a clean cloth.
Disinfection can be done with alcohol if the surface is dried afterwards.

Leather

If you take care of the leather in the right way, it will become more beautiful over the years.

Leather is heat sensitive. Therefore, direct sunlight and close contact with heating elements should be avoided.
Vacuum the furniture to remove loose dirt and dust.
Wipe the leather with a slightly damp cloth and a mild soapy solution can be used for cleaning.
Water-based leather care products extend the lifespan.

Glass

Cleaned with window cleaner or washing-up liquid diluted in water.

Rare 077

Name: Rare 077 | NC Nordic Care
SKU: 077

Armchair

Rare armchair is the result of our vision to create products from natural materials, with the least possible waste and material consumption.

Rare armchair, here our basic idea was to try to make use of the whole tree and show respect for the wood raw material in a new empathetic way. We have chosen to use parts of the tree that are otherwise hidden behind textiles or burned, to really make the most of it. In this way, each chair becomes unique and more alive, a small color change or twig shows in a nice way our concern to take care of all materials and not discard anything unnecessarily. The construction of the chair with its straight shapes and finger joints on the legs allows us to minimize material consumption and contributes to less waste, nothing that impairs the strength.

Rare is made of FSC-certified birch. Rare is design by NC Design Studio.

We use almost all of the raw wood
Reduced material consumption
Light with good strength
Hangable
Demountable-replaceable spare parts
Removable upholstery
Any NCS color
Tested for public use and meets the requirements for durability & safety, set forth in the following standard, EN 16139

Frame in birch
Frame in any NCS color
Back and seat cushion
Rubber fabric
Sliding wheels

Solid wood
Removable upholstery
Replaceable padding